LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 300 Base, 4WD, Gas >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection, Diesel >> Sensor, Accelerator Pedal Position >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Accelerator Pedal Position: Installation: Installation

Fig 1: View Of Accelerator Pedal Assembly
GC0080493Courtesy of CHRYSLER GROUP, LLC
1 - HARNESS CONNECTOR
2 - FASTENERS
3 - ACCELERATOR PEDAL ASSEMBLY
  1. Install the accelerator pedal assembly (3). Tighten nuts (2) to 34 N.m (25 ft. lbs.).
  2. Connect the APPS wire harness connector (1).
  3. Install the drivers lower dash board close out panel.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals