LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2013 >> 200 V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Ignition Switch - Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Switch - Installation







INSTALLATION






1. If removed, install the ignition switch (1) to the ignition key cylinder (2).

2. If removed, install the Sentry Key Immobilizer (SKREEM) module (3) to the ignition key cylinder (2).

3. To install the ignition switch, follow the procedure to install the SKREEM module Sentry Key Immobilizer Module (SKREEM) - Installation.

4. Connect the negative battery cable.

scientia non olet · About LEMON Manuals