LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2012 >> 300 AWD V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Keyless Starting System >> Keyless Start Antenna >> Service and Repair >> Remote Start Antenna - Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Remote Start Antenna - Removal






REMOVAL





1. Disconnect the negative battery cable.
2. Remove the headliner Headliner - Removal.
3. Disconnect the remote start antenna (1) from the RF Hub module jump wire (2) located on the driver side D-pillar.
4. Remove the remote start harness (3) from the D-pillar.
5. Gently pull down on the antenna mounting bracket to remove from the structural support rib.
6. Remove the remote start antenna from the mounting bracket.

scientia non olet · About LEMON Manuals