LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2012 >> 300 AWD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Exhaust Temperature Sensor >> Service and Repair >> Installation >> 1/1
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

1/1





EXHAUST TEMPERATURE SENSOR 1/1





1. Install the exhaust temperature sensor (7) and tighten to 45 Nm (33 ft. lbs.).





2. Align the Diesel Particulate Filter (DPF) pipe to the turbocharger. Tighten the clamp (2) to 25 Nm (18 ft. lbs.)





3. Connect the upstream exhaust temperature sensor wire harness connector.
4. Connect the oxygen sensor wire harness connector (1).





5. Install the HVAC air inlet housing (1) and securely tighten nuts.

6. Install the cowl extension and the side extensions Cowl Panel Cover - Installation.





7. Install the engine cover (1).
8. Connect the negative battery cable.

scientia non olet · About LEMON Manuals