LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Switch, Ignition >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch, Ignition: Installation: Installation

Fig 1: SKREEM Positioning
GC0121143Courtesy of CHRYSLER GROUP, LLC
  1. If removed, install the ignition switch (1) to the ignition key cylinder (2).
  2. If removed, install the Sentry Key Immobilizer (SKREEM) module (3) to the ignition key cylinder (2).
  3. To install the ignition switch, follow the procedure to install the SKREEM module. Refer to MODULE, SENTRY KEY IMMOBILIZER (SKREEM), INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals