LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Convertible V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Knock Sensor - Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Knock Sensor - Removal






3.5L





1. Remove the engine cover.
2. Perform the fuel pressure release procedure Service and Repair
3. Drain the cooling system Service and Repair
4. Disconnect and isolate the negative battery cable.
5. Remove the air cleaner body Air Cleaner Body - Removal





6. Remove the upper and lower intake manifolds Intake Manifold - Removal.





7. Disconnect electrical connector from knock sensor.
8. Remove the knock sensor from the engine block.

scientia non olet · About LEMON Manuals