LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, ED3 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> SENSOR, Coolant Temperature >> Installation >> Diesel Engine
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Diesel Engine

Fig 1: THERMOSTAT AND SENSOR
GC0083977Courtesy of CHRYSLER LLC
1 - FUEL RAIL
2 - EGR VALVE
3 - POWER STEERING PUMP
4 - GENERATOR
5 - COOLANT TEMPERATURE SENSOR
6 - THERMOSTAT HOUSING
7 - FUEL RAIL PRESSURE SENSOR
  1. Position and install coolant temperature sensor (5).
  2. Connect coolant temperature sensor electrical connector.
    Fig 2: ENGINE COOLANT TEMPERATURE SENSOR
    GC0083978Courtesy of CHRYSLER LLC
    1 - RETAINING CLAMP
    2 - ENGINE COOLANT TEMPERATURE SENSOR
  3. Refill coolant system to proper level with proper mixture of coolant. See Cooling - Standard Procedure .
  4. Install engine cover.
  5. Connect negative battery cable.
    WARNING: Use extreme caution when engine is operating. Do not stand in a direct line with fan. Do not put your hands near pulleys, belts or fan. Do not wear loose clothes.
  6. Start engine and inspect for leaks.
scientia non olet · About LEMON Manuals