LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Electronic Control Modules (Service Information)) >> MODULE, Engine Control >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

MODULE, Engine Control: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECM Location
GC0079963Courtesy of CHRYSLER LLC
  1. If removed, position the bracket onto the Engine Control Module (ECM) and install the two retaining nuts. Tighten the nuts securely.
  2. Position the ECM and bracket to the vehicle.
  3. Install the two bolts that secure the ECM bracket to the inner fender. Tighten the bolts securely.
  4. Connect the electrical connectors to the ECM.
  5. Install the cowl panel cover. Refer to Body/Exterior/COVER, Cowl Panel - Installation .
  6. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals