MODULE, Powertrain Control: Removal: Removal
WARNING: This page is about a different car, the 2010 Dodge Charger and 2010 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the cowl panel cover. Refer to Body/Exterior/COVER, Cowl Panel - Removal .
- Remove the bolt that secures the Powertrain Control Module (PCM) and bracket to the cross support.
- Disconnect the electrical connectors from the PCM.
- Remove the PCM and bracket from the vehicle.
- If required, remove the two screws that secure the bracket to the PCM and remove the bracket from the PCM.
- If required, remove the rubber bumper from the PCM.