LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Sebring Base, 2D Convertible, 2.4 J >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection-Diesel >> Accelerator Pedal Position Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Accelerator Pedal Position Sensor: Removal

Fig 1: ACCELERATOR PEDAL - LHD
GC0070498Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable at battery.
  2. Disconnect the electrical connector from accelerator pedal.
  3. Remove mounting nuts and remove accelerator pedal from the mounting studs.
scientia non olet · About LEMON Manuals