LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> PT Cruiser Base, 2D Convertible, 2.4 E >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection 2.2L Diesel >> Sensor-Fuel Pressure >> Removal >> Fuel Pressure Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Sensor

WARNING: High-pressure fuel lines deliver fuel under extreme pressure from the injection pump to the injectors. This maybe as high as 1600bar (23,200psi). Use extreme caution when inspecting for high-pressure fuel leaks. Fuel under this amount of pressure can penetrate skin causing personal injury or death. Inspect high-pressure fuel leaks with a sheet of cardboard. Wear safety goggles and adequate protective clothing when servicing fuel system.
  1. Disconnect negative battery cable.
  2. Remove engine cover. Refer to REMOVAL .
  3. Disconnect fuel pressure sensor electrical connector. See Figure.
  4. Remove fuel pressure sensor from fuel rail. See Figure.