LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Crossfire 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules - Service Information >> Powertrain Control Module >> Removal >> Powertrain Control Module - LHD
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Powertrain Control Module - LHD

Fig 1: Identifying Plastic Control Module Box Cover & Negative Battery Cable
GC0034985Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable (2).
  2. Slide the clips forward to remove the plastic control module box cover (1).
    Fig 2: Identifying Metal Retaining Clip
    GC0034986Courtesy of CHRYSLER LLC
  3. Holding the metal powertrain control module retaining clip (1) back, pull the powertrain control module up and out of the control module box.
    Fig 3: Removing PCM & Electrical Connectors
    GC0034987Courtesy of CHRYSLER LLC
  4. Disconnect the electrical connectors (1) and remove the powertrain control module (2).
scientia non olet · About LEMON Manuals