LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Aspen 5.7 2, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor-Intake Air Temperature >> Installation >> Intake Manifold Air Temperature Sensor-5.7L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Manifold Air Temperature Sensor-5.7L

Fig 1: Identifying IAT Sensor - 5.7L
GC0006588Courtesy of CHRYSLER LLC
  1. Check condition of sensor O-ring.
  2. Clean sensor mounting hole in intake manifold (1).
  3. Position sensor (2) into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector.
scientia non olet · About LEMON Manuals