LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Limited, 3.5 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Electronic Control Modules (Service Information)) >> MODULE, Engine Control >> Operation >> Operation >> ECM Operating Modes >> Limp-In Mode
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Limp-In Mode

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

If there is a fault detected with the accelerator pedal position sensor, the ECM will set the engine speed at 1100 RPM.

scientia non olet · About LEMON Manuals