LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Base, 2.7 R, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 280 (Power Distribution System) >> Junction Block >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Junction Block: Removal: Removal

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO SERVICE INFORMATION FOR ELECTRICAL/RESTRAINTS BEFORE ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.

  1. Disconnect and isolate the battery negative remote cable from the remote terminal on the left shock tower.
  2. Depress the mounting clips to disengage and remove the Junction Block (JB) housing from its mounting bracket.
  3. Disconnect the electrical connectors.
  4. Remove the JB.
scientia non olet · About LEMON Manuals