LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (3.5L Engine (Service Information)) >> Engine Mounting >> Mount-Rear - AWD >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Mount-Rear - AWD: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Rear Mount
GC0060246Courtesy of CHRYSLER LLC
  1. Position rear mount (3).
  2. Install the 4 lower mount to cradle bolts (2) and torque to 50 N.m (37 ft. lbs.).
  3. Install 3 top mount bracket bolts and torque 50 N.m (37 ft. lbs.).
  4. Install the Power Transfer Unit (PTU). Refer to INSTALLATION .
scientia non olet · About LEMON Manuals