LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Pacifica Limited, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Level Sending Unit / Sensor >> Installation >> Fuel Level Sending Unit
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Level Sending Unit

Fig 1: Module Top Alignment Pins
GC0000374Courtesy of CHRYSLER LLC
  1. Install fuel level sending card to module.
  2. Connect electrical connector for fuel level sending card.
  3. Install module top to module.
    Fig 2: Alignment Pins In Place
    GC0000375Courtesy of CHRYSLER LLC
  4. Install module into the tank with the level unit towards rear of tank.
  5. Install a new seal onto the tank, making sure seal is properly seated in tank groove.
  6. Install module lock ring.
    NOTE: Use a brass punch to Install the 1/4 turn lock ring. Make sure all 5 tabs are properly seated.
  7. Connect vapor line and electrical connector.
  8. Install fuel tank, see INSTALLATION .
  9. Connect negative battery cable.
  10. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About LEMON Manuals