LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire V6-3.2L VIN L >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Module >> Service and Repair >> Sentry Key Remote Entry Module - Removal >> Sentry Key Remote Entry Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sentry Key Remote Entry Module






SENTRY KEY REMOTE ENTRY MODULE





1. Disconnect the negative battery cable.

2. Remove the instrument cluster to gain access to the SKREEM module.

3. Disconnect the 2-pin CAN bus connector and the 18-pin electrical connector (1) from the SKREEM.

4. Disconnect the 2-pin connector for the sentry key antenna ring.

5. Press the retaining tabs apart.

6. Remove the SKREEM from the base plate.
scientia non olet · About LEMON Manuals