LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Limited, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> O2 Sensor >> Removal >> Downstream Oxygen Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Downstream Oxygen Sensor

Fig 1: Removing/Installing Downstream O2 Sensor
GC0032361Courtesy of CHRYSLER LLC
  1. Disconnect the negative battery cable.
    NOTE: The left side O2 sensor is shown in the illustration. The right side is similar.
  2. Raise and support the vehicle.
  3. Disconnect the O2 sensor harness connector.
  4. Remove the O2 sensor (1).
scientia non olet · About LEMON Manuals