Hard Wired Inputs
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
The hard wired inputs to the BCM include the following:
- Ambient air temperature sensor
- Automatic HeadLamp Module (AHLM) - also known as the adaptive lighting module, Headlamp Range Adjustment/HRA or headlamp range controller/LWR
- Backup lamp switch - manual transmission only
- Brake fluid level switch
- Brake lamp switch
- Coolant level switch
- Driver side sliding door power lock motor
- Front wiper motor park switch
- Fuel level sensor
- Generator output - engine running
- Headlamp switch
- Left front brake wear sensor
- Left rear brake wear sensor
- Parking brake switch
- Passenger side front door power lock motor
- Passenger side front door power window switch
- Passenger side sliding door power lock motor
- Rear dome lamp switch
- Rear door power lock motor
- Right front brake wear sensor
- Right rear brake wear sensor
- Washer fluid level sensor