LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.5L Engine (Service Information)) >> Engine Mounting >> Engine Mount-Right >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Mount-Right: Installation

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Right Motor Mount Lower
GC0066183Courtesy of CHRYSLER LLC
  1. Install the engine mount to the engine block and tighten the bolts to 20 N.m (177 in. lbs.) and then an additional 90 degrees.
  2. Install the left mount bracket bolts and tighten to 35 N.m (26 ft. lbs.).
  3. Lower the vehicle.
  4. Lower the engine into the engine mounts.
  5. Raise and support the vehicle.
  6. Install the engine mount to cradle bolt and tighten to 53 N.m (26 ft. lbs.).
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals