LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Battery System) >> Battery System >> Cables-Battery >> Removal >> Battery Cable
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Battery Cable

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
  2. Disconnect and isolate the remote battery negative cable terminal.
  3. One at a time, trace and disconnect the battery cable retaining push-pins, fasteners and routing clips until the cables are free from the vehicle.
  4. Feed the battery cable assembly out of the vehicle.
scientia non olet · About LEMON Manuals