1480-Glow Plug Display Can Defect: Notes
WARNING: This page is about a different car, the 2009 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With the ignition on and the Glow Plugs commanded on.
- Set Condition:
The Glow Plug Control Module reports a power supply circuit fault to the ECM.
| Possible Causes |
|---|
| INTERMITTENT DTC |
| FUSED ASD RELAY OUTPUT CIRCUIT OPEN OR HIGH RESISTANCE |
| GROUND CIRCUIT OPEN OR HIGH RESISTANCE |
| GLOW PLUG MODULE |
| ENGINE CONTROL MODULE (ECM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Engine Control (ECM) - Standard Procedure