October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Seat Belt Control Timer Module - Jr27 - Export: Removal
- Adjust the drivers seat to its full forward position.
- Disconnect and isolate the battery negative remote cable.
- Using a razor knife or equivalent, cut the carpet a small amount (about an inch or so) to access the Seat Belt Control Timer Module (SCTM).
- Disconnect the electrical connector.
- Remove the two screws retaining the SCTM.
- Remove the SCTM from the vehicle.