LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Ignition System (Service Information)) >> Ignition Coil >> Removal >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Coil: Removal: Notes

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Negative Battery Cable
GC0035079Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable (2).
    Fig 2: Identifying Engine Appearance Cover
    GC0032575Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove the air cleaner inlet tubes (2).
  3. Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.
    Fig 3: Removing/Connecting Ignition Coil From Cylinder Head Cover
    GC0035091Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the ignition coil wire harness connector (1).
  5. Disconnect the spark plug cables (4) from the spark plugs.
  6. Remove the ignition coil retaining bolt (2).
  7. Remove the ignition coil (3) from the cylinder head cover.
scientia non olet · About LEMON Manuals