October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
O2 Sensor: Installation
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Install the oxygen sensor. See Figure.
- Install the heatshield and tighten fasteners to 9N.m (80 lbs. in.). See Figure.
- Properly position the oxygen sensor wiring harness and connect the electrical connector. See Figure.
- Connect the negative battery cable.