October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Fuel Pump Module: Installation
- Wipe seal area of tank clean and place a new seal in position in the tank opening.
- Position fuel pump in the tank.
- Position the lock ring over the fuel pump module.
- Tighten the lock ring using a brass punch and hammer.
- Connect the electrical connector.
- Connect the fuel line to the fuel pump.
- Install the fuel tank, refer to INSTALLATION .
- Lower vehicle.
- Connect the battery cable.
- Fill fuel tank. Use the DRB III® scan tool to pressurize the fuel system. Check for leaks.