LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Seat Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Seat Switch: Installation

  1. Position the switch and install the switch attaching screws.
  2. Install the knobs on the switch (if required).
  3. Connect wiring electrical connector on switch.
  4. Install the seat cushion side shield. Refer to INTERIOR/EXTERIOR for the procedure.
  5. Connect the negative battery cable remote terminal on the remote battery post.
scientia non olet · About LEMON Manuals