LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Vehicle Theft Security System (Service Information) >> Intrusion Module >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intrusion Module: Installation

Fig 1: Removing/ Installing Intrusion Module
GC0041438Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the intrusion module (1) onto the instrument panel.
  2. Install the two screws (2) that secure the module (1) to the instrument panel.
  3. Connect the electrical connector (3) on the module (1).
  4. Install the instrument panel top cover (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL TOP COVER - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About LEMON Manuals