LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> UNDERHOOD Accessory Fuse Block >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

UNDERHOOD Accessory Fuse Block: Installation

Fig 1: Locating Fuse Box Release Tabs
GC0035893Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the harness connectors to the underhood accessory fuse block.
  2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs (1) connect.
  3. Install the lid.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals