LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Sentry Key Remote Entry Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sentry Key Remote Entry Module: Installation

Fig 1: Identifying SKREEM Harness Connectors
GC0033562Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the SKREEM module to the base plate.
  2. Connect the 18-pin harness connector and the 2-pin CAN BUS harness connector (1) to the SKREEM module.
  3. Connect the 2-pin harness connector for the sentry key antenna ring.
  4. Install the Instrument Cluster. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - INSTALLATION) .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals