LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Fuel System) >> Fuel Injection >> Intake Air Pressure Sensor >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Intake Air Pressure Sensor: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the pressure sensor in the air cleaner cover and install the fasteners. See Figure.
  2. Connect the electrical connector. See Figure.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals