October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation
- Install the drive unit end of the link rod on its mounting sphere by gently pushing straight on.
- Push the plastic retainer down to lock the mechanism in position.
- Install the D-pillar trim on the vehicle. Refer to INTERIOR/EXTERIOR
for the procedure.
- Install the liftgate end of the link rod on its mounting sphere by gently pushing straight on.
- Push the plastic retainer down to lock the mechanism in position.
- Close the liftgate and check for proper power liftgate operation.