September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Removal - 2.0/2.4L
- Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
- Remove the negative battery cable.
- Disconnect electrical connector from camshaft position sensor.
- Remove camshaft position sensor mounting screws. Remove sensor.
- Loosen screw attaching target magnet to rear of camshaft. See Fig 1.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - CAM MAGNET/TARGET |
| 2 - CAMSHAFT POSITION SENSOR |