LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Charging System) >> Generator >> Removal >> 5.7L
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Section 69 (Charging System): Generator: Removal: 5.7L

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTEM.
  1. Disconnect negative battery cable at battery.
  2. Remove generator drive belt. Refer to COOLING for procedure.
  3. Raise and support vehicle.
  4. Unsnap plastic insulator cap from B+ output terminal.
  5. Remove B+ terminal mounting nut at rear of generator. Disconnect terminal from generator.
  6. Disconnect field wire connector at rear of generator by pushing on connector tab.
    Fig 1: GENERATOR SUPPORT BRACKET
    GC0015639Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove generator support bracket nut (4) and bolt (3). Remove support bracket (1).
    Fig 2: GENERATOR
    GC0015638Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove 2 generator mounting bolts (1).
  9. Remove generator (2) from vehicle.
scientia non olet · About LEMON Manuals