September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Window Switch: Removal: Front

Disconnect and isolate the battery negative cable.
Using a trim stick (special tool #C-4755) or equivalent, gently pry at the top of the switch. See Fig 1.

Fig 1: WINDOW SWITCH REMOVAL (REAR SHOWN - FRONT SIMILAR)
Courtesy of DAIMLERCHRYSLER CORP.

1 - TRIM STICK

2 - RETAINING CLIP LOCATION
Remove switch and disconnect electrical harness connector. See Fig 2.

Fig 2: FRONT WINDOW SWITCH

GC0022983

Courtesy of DAIMLERCHRYSLER CORP.