Mount - Left: Removal

WARNING: This page is about a different variant/trim than selected.

Fig 1: LEFT ENGINE MOUNT HEAT SHIELD

Courtesy of DAIMLERCHRYSLER CORP.

1 - LEFT ENGINE MOUNT

2 - HEAT SHIELD

3 - BOLT

Disconnect the negative battery cable.
Raise and support the vehicle.
Remove both engine mount to cradle nuts and remove the left engine mount studs.
Using a suitable jack and a block of wood under the oil pan, raise the engine until the weight is off of the mounts (approximately 5mm).
Remove the engine mount heat shield. See Fig 1.

Fig 2: LEFT ENGINE MOUNT
Courtesy of DAIMLERCHRYSLER CORP.

1 - ENGINE MOUNT

2 - BOLT
Remove the engine mount bolts and remove the mount. See Fig 2.