LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 364 (Anti-Lock Brake System (Service Information)) >> Sensor-Wheel Speed-Abs-Rear >> Installation >> Without Traction Control
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Without Traction Control

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Rear Wheel Speed Sensor (With Traction Control)
GC0011482Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the O-ring on the sensor (1) (if removed).
  2. Insert the sensor (1) in the differential housing (3).
  3. Install the sensor shield.
  4. Install the sensor mounting stud (2) and tighten to 24 N.m (200 in. lbs.).
  5. Install the brake line on the sensor stud (2) and install the nut.
  6. Connect the harness to the sensor. Be sure the seal is securely in place between the sensor and the wiring connector. 
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals