LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (HVAC System (Service Information)) >> Controls >> Control-A/C Heater >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Control-A/C Heater: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: A/C-Heater Control-Typical, Rear View
GC0007393Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the A/C-heater control (1) into the instrument panel center bezel.
  2. Install the screws (2) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Connect the wire harness connectors (3 and 4) to the back of the A/C-heater control (5) and install the instrument panel center bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - INSTALLATION) .
  4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals