LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Door System - Front) >> Window Regulator - Power >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Window Regulator - Power: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert front guide rail through front access hole.
  2. Insert rear guide rail through rear access hole.
  3. Place window regulator in position on inner door panel.
  4. Place screw heads on guide rails in position through key hole slots in inner door panel.
  5. Tighten screws to attach front and rear guide rails to inner door panel to 8.5-10.7 N.m (75-95 in lbs). Tighten top screw first and bottom screw second.
  6. Tighten screws to attach motor/housing to inner door panel to 2.8 N.m (25 in lbs).
  7. Connect wire connector into power window motor.
  8. Install door glass. (Refer to DOOR GLASS  )
  9. Verify door glass alignment and operation.
  10. Install inner belt molding (Refer to FRONT DOOR INNER BELT MOLDING )
  11. Install watershield. (Refer to WATERSHIELD  )
scientia non olet · About LEMON Manuals