LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Power Seat System) >> Driver Power Seat Track >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Power Seat Track: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat cushion on the seat track.
  2. Install the four seat track retaining bolts in the seat cushion pan. Torque the bolts to 28.5 N.m.
  3. Position the seat back and install the two seat back frame mounting bolts and the two seat back recliner bolts. Torque the bolts to 55 N.m.
  4. Route and connect the electrical connectors between the power seat track and the seat assembly.
  5. Install the seat side cover and power seat switch as an assembly (Refer to SEATS ).
  6. Install the rear fabric blocker trim panel on the rear of the front seat.
  7. If the vehicle is so equipped, position the Memory Seat/Mirror Module (MSMM) and connect the MSMM electrical connectors.
  8. Install the MSMM retaining screws.
  9. Install the seat assembly in the vehicle (Refer to SEATS ).
scientia non olet · About LEMON Manuals