Air Bag Control Module: Testing and Inspection

FRONT SEATBACK ASSEMBLY WITH SIDE-AIRBAG MODULE CHECK

WARNING:
- If any improper part is found during the following inspection, replace the front seatback assembly with a new one. Dispose of the old one according to the specified procedure.
- Never attempt to measure the circuit resistance of the side-airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental side-airbag deployment will result in serious personal injury.




1. Check the side-airbag module deployment section for dents or deformation.
2. Check the connector for damage, the terminals for deformation, and the harness for binds.