LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - Automatic Transmission >> Speed Sensor - Input >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Sensor - Input: Installation

  1. Verify o-ring is installed into position (Fig 1).
  2. Install and tighten input speed sensor to 27 N.m (20 ft. lbs.) (Figure).
  3. Connect speed sensor connector (Figure).
  4. Connect battery negative cable.
    Fig 1: Identifying O-Ring Location
    G03574377Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals