LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System - Rear >> Check Strap >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Check Strap: Installation

  1. Position check strap on door through speaker hole (Figure).
  2. Install nuts attaching check strap to door end frame. Tighten nuts to 11 N.m (90 in. lbs.) torque.
  3. Install door speaker, if equipped.
  4. Install rear door watershield. (Refer to INSTALLATION ).
  5. Install front door trim panel. (Refer to INSTALLATION ).
  6. Place check strap into position on B-pillar.
  7. Install screws attaching check strap to B-pillar (Figure). Tighten screws to 12 N.m (105 in. lbs.) torque.
scientia non olet · About LEMON Manuals