LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Antilock Brake >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Controller Antilock Brake: Removal

  1. Disconnect negative (-) battery cable from battery post and isolate.
  2. Raise and support vehicle.
  3. Remove 3 screws attaching CAB to HCU (Fig 1).
    Fig 1: Removing Controller Antilock Brake
    G03571414Courtesy of DAIMLERCHRYSLER CORP.
  4. Slide CAB off HCU (Figure).
  5. Disconnect 47-way wiring connector at CAB (Figure).
  6. Remove CAB.
scientia non olet · About LEMON Manuals