LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System - Front >> Frame Closeout Molding >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Frame Closeout Molding: Removal

  1. Open door.
  2. Lower door window glass.
  3. Remove door trim panel. (Refer to REMOVAL  ).
  4. Remove door inner belt molding. (Refer to FRONT INNER BELT MOLDING WEATHERSTRIP ).
  5. Using a trim stick C-4755 or equivalent and band pull down on front door frame closeout molding to disengage from window frame channel (Figure ).
  6. Remove closeout molding from vehicle.
scientia non olet · About LEMON Manuals