October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Block Heater: Installation
- Thoroughly clean cylinder block heater cavity.
- Insert heater assembly into block such that mounting hole is located below heater terminals.
- Install mounting screw and tighten to 12 N.m (105 in.lbs.).
- Attach power cord to heater.
CAUTION:
To prevent damage, the power cord must be secured in its retainer clips, and not positioned so it could contact linkages or exhaust manifolds.
- Lower vehicle.