October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Junction Block: Installation
- Install Junction Block/BCM to vehicle.
- Connect BCM wire connectors and RKE antenna connector.
- Install Junction Block/BCM.
- Install wire harness connectors to Junction Block/BCM.
- Install four mounting screws.
- Install under column ducts.
- Install left knee blocker.
- Connect cable to hood release, decklid release switch wiring, and install two screws to lower instrument panel.
- Install left end cap.
- Connect the negative battery cable remote terminal to the remote battery post.