LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame System & Bumper System >> Front Fascia >> Removal >> Removal - Intrepid
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal - Intrepid

  1. Release hood latch and open hood.
  2. Remove push pin fasteners attaching bottom of fascia (air dam) to lower crossmember (Fig 1 ).
    Fig 1: Air Dam
    G03498623Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove fasteners attaching fascia to splash shields (Fig 2 ).
    Fig 2: Front Bumper Fascia
    G03498624Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove push pin fasteners attaching the fascia to upper radiator closure panel.
  5. Pull the sides of the fascia outwards to disengage fascia from drive pins then pull fascia forward.
  6. Disconnect fog lamp wire connectors, if equipped.
  7. Remove fascia from vehicle.
scientia non olet · About LEMON Manuals