October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Cruise Control Systems: Servo: Installation
- With throttle in full open position align hole in speed control cable sleeve with hole in servo pin and install retaining clip.
- Connect vacuum hose to servo.
- Connect electrical connector.
- Insert servo studs through holes in speed control cable and mounting bracket.
- Install nuts, tighten to 6.7 N.m (60 in.lbs.).
- Install servo and bracket and tighten bolt and nuts.
- Connect negative battery cable.